The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares V85 ALL Engines

Sort by Title

Sort by Price

Page 2 of 8

1 2 3 4 5 6 7 8

Crush Washer Aluminium

SIA10070 Universal Part

Aluminium crush washer for large sump drain and filler plugs (big twins)

We advise changing this at every oil change. Can be used in place of Guzzi ref. 90714195

part in stock More than 5 in stock

95100709 GU95100709 95 10 07 09
9510 0709 9510.0709 95.10.07.09

£1.00

INC VAT

£0.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Crush Washer Aluminium

SIA10200 Universal Part

Dimensions:
16.2mm x 22mm x 1.4mm

Aluminium crush washer

Various applications e.g. tacho drive plug seal models with electronic tacho or without tacho, oil line seal on Cali 1100 breather, oil pressure switch adapter on small twins and sump plug on V11 Sport. Also known as Guzzi ref. 95100602. Can be used in place of Piaggio ref. 287174

part in stock More than 5 in stock

10154200 GU10154200 10 15 42 00
1015 4200 1015.4200 10.15.42.00

£0.80

INC VAT

£0.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Exhaust Stud Kit Titanium

SSA85048 Fits V7 III ALL, V7 850 ALL, V9 ALL, V85TT, Cali 1400, Audace, 1200 Sport (4v/Cyl), Griso 1200 (4v/Cyl), Norge 1200 (4v/Cyl), Stelvio

Dimensions:
M8 x 48mm studs

Exhaust stud kit consisting of 4 x titanium studs, 4 x stainless dome head nuts and 4 x stainless wavy washers

The mild steel exhaust studs fitted to modern Guzzis are notorious for corroding in place. Replace yours now with these corrosion resistant parts to ensure you can remove your exhaust in years to come

part in stock More than 5 in stock

1A003632R

£22.00

INC VAT

£18.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Exhaust Stud M8

ENA85632 Fits V7 III ALL, V7 850 ALL, V9 ALL, V85TT, Cali 1400, Audace, 1200 Sport (4v/cyl), Griso 1200 (4v/cyl), Norge 1200 (4v/cyl), Stelvio

Dimensions:
M8 x 48mm x 1.25

M8 exhaust stud

Also known as Guzzi ref. 827018, AP8560061, B017636

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

1A003632R

Also fits Aprila Caponord, Aprilia 400 Atlantic Sprint, Aprilia 400 Scarabeo Light , Aprilia 500 Atlantic, Aprilia 500 Scarabeo Light , Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 900 Dorsoduro, Aprilia 900 Shiver, Aprilia 900 Shiver ABS, Aprilia 900 SMV Dorsoduro

£2.40

INC VAT

£2.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Exhaust Stud M8 Titanium

SSA85632 Fits V7 III ALL, V7 850 ALL, V9 ALL, V85TT, Cali 1400, Audace, 1200 Sport (4v/cyl), Griso 1200 (4v/cyl), Norge 1200 (4v/cyl), Stelvio

Dimensions:
M8 x 48mm x 1.25

Titanium M8 exhaust stud. The factory studs on these models are prone to corrosion so we recommend replacing now with these corrosion free titanium parts.

See Ti stud kit SSA85048 for replacement stud kit. Also known as Guzzi ref. 827018, AP8560061, B017636

part in stock More than 5 in stock

1A003632R

£5.00

INC VAT

£4.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Gasket Exhaust Manifold

ENA85091 Fits V7 III ALL, V7 850 ALL, V9 ALL, V85TT

Dimensions:
44mm OD

Exhaust gasket for standard downpipes, less expensive alternative to factory part

Copper gasket

part in stock 5 in stock

852090 MG852090

Also fits Aprilia RSV4, Aprilia Tuono V4, Aprilia RS660

£9.00

INC VAT

£7.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Gasket Exhaust Manifold OE

ENA85090 Fits V7 III ALL, V7 850 ALL, V9 ALL, V85TT

Exhaust gasket for standard downpipes

Composite gasket, see ENA85091 for less expensive alternative

This part is available by special order, request a quote

852090 MG852090

Also fits Aprilia RSV4, Aprilia Tuono V4, Aprilia RS660

£19.00

INC VAT

£15.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Gearbox, Final Drive Level Plug, Rear Sump Plug Magnetic

TRA95981 Fits V65, V50 ALL, V35 ALL, Le Mans 3, S3, T3 Cali, T4, T5, 1000S, SP II, Spada 3, Cali 3, Strada 1000, Centauro, Cali 1100 (1994-1997), Cali EV, 850 GT, V7 Sport, 1100 Sport, Daytona ALL, Nevada ALL, Breva ALL, Norge ALL, V7 II ALL, V7 III ALL, V9 ALL, V85TT, V7 850 ALL

Dimensions:
M10 x 15mm

Magnetic gearbox and final drive level plug in zinc finish

Magnetic tip collects steel swarf. Also known as Guzzi ref. 31003766. Used as sump plug on 1100 Sport.
See SSA95214 for stainless steel version of this part (only available without magnetic tip).

part in stock 1 in stock

95980214 GU95980214 95 98 02 14
9598 0214 9598.0214 95.98.02.14

£15.00

INC VAT

£12.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Half Nut M10

ENA92510 Universal Part

Dimensions:
M10 x 1 half nut

Oil pump nut on some small twins- check parts book for exact application

part in stock 1 in stock

92602510 GU92602510 92 60 25 10
9260 2510 9260.2510 92.60.25.10

£1.70

INC VAT

£1.42 EX VAT this is the price you will pay if you are ordering from outside the UK

M10 Crush Washer

SIA10900 Universal Part

Dimensions:
14mm outer diameter x 10.4mm inner diameter x 1mm

M10 crush washer used for sump (small twins, V11 Sport), gearbox and drive box level and drain plugs. Also used for lower fork damper retaining bolt washer. Used for sump drain on Breva 1100, 1200, Griso etc...

Also known as Guzzi ref. 25656100, 01528930, AP9150472, 95100309, 887879, 25656102, 486075, AP8163091
These may be supplied as either aluminium or copper crush washers

part in stock More than 5 in stock

10528900 GU10528900 10 52 89 00
1052 8900 1052.8900 10.52.89.00

£0.50

INC VAT

£0.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 2 of 8

1 2 3 4 5 6 7 8